
Call us on 0203 488 0966 (Call 24/7) or send an enquiry to sales@ulhservices.co.uk
In a Rush? Sameday, Next Day & Weekend Delivery Available
Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC.
NO reduction in working load limits when side loads applied:
No deration up to 90° has been established for Tiger BCF model clamps and applies only for overhead beam attachments. It DOES NOT apply when used for lifting beams.
We advise that structural calculations are carried out on all beams and supporting steel work by qualified engineering departments to ensure safe operation.
* 5:1 factor of safety is achieved in a vertical plane
Our Beam Clamps allow a quick installation on to steel beams. The clamp opening can be adjusted to various commonly available profiles, for positioning and adjustment. A lifting device can be inserted into the ring by using a hook.
These units meet and exceed all the requirements within BS EN 13155:2003+A2:2009 and AS4991.
Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC.
This series trolleys are divided into two kinds: plain trolley & geared trolley. The geared trolley is had operated by pulling the hand-chain & the plain trolley by pushing the load lifted. Running on the bottom flange of monorail and swivel hanger pin to the range lit. The trolley to be attached with hand block becomes a conveyer.